Easter train

I present to you my Easter train. I like this train very much. So let's start printing.

First the print details:

1. Egg 1 - first change color row 12,2 mm or layer 61
             - second change color row 24,4 mm or layer 122
             - third change color row 30,6 mm or layer 153
2. Egg 3 - first change color row 10,2 mm or layer 51
3. Pilot - first change color row 2,2 mm or layer 11
4. Chimney 1 - first change color row 14,0 mm or layer 70
                      - second change color row 18,0 mm or layer 90
5. Filament PLA
6. 0,2 mm layer height
7. Files for printing where support is needed: Pilot, Glass for front light, Egg 2, Wagon base, Train base, Cabin

So let's start building Easter train:

1. Take the train base and attach pilot to it                       
2. Now we attach the cabin to the train base with M3x8 mm screws
3. Take a small wheel and insert small flowers into it
4. Take a big wheel and insert big flowers into it              
5. Assembly the wheels on the train base using M3x18 mm screws. Tighten the screws so that the wheel rotates. Not to the end.                           
6. Take chimney 1 and connect it with the chimney connecting rod. Then we connect chimney 2, chimney 3 and finally chimney 4 to it. We mount this assembly group on egg 2.
7. We insert the front glass into the front light.                 
8. We pass the led light through the hole in the cabin, then through egg 3, 2 and 1.
9. We put the LED lights that I wound on a pencil into the front light and connect it to egg 1.
10. We pull out the rest of the led lights through the hole on the top of egg 1. Then we wind it on a pencil and insert it into the rear light. Put the rear glass into the rear light. Insert the pre-assembled of rear light into egg 1.                                          
11. We connect eggs 1 to 3 and screwing them with two M3x35mm screws.
12. We place the front part on the base and screwing it with two M3x18mm screws.
13. Put the roof on the top cabin.                                           
14. The train is finished. Hooooooooray.

Building wagon:

1. Take a small wheel and insert small flowers into it (picture in train step 3).
2. Now we attach the wagon to the wagon base with M3x10 mm (Wagon 1) or M3x6 mm for wagon 2 screws.                                                          
3. Assembly the wheels on the train base using M3x18 mm screws. Tighten the screws so that the wheel rotates. Not to the end.                            

That is all. Enjoy the easter.

________________________________________________________________________________________________________________ If you want to support my other projects, you would contribute to filaments at PayPal. Thanks.