Simple Shock mount for Audio Technica AT2020

A very quickly thrown together working shock mount, made for the AT2020 but you can remix the f3d file to match your own needs! 

Use rubber bands/o-rings/paracord or whatever you have for connecting the inner and outer ring.

Print middle ring with organic supports!!

• 0.4mm nozzle
• PLA at 180C°
• Original Scale
• 15% infill (You use whatever you like, really doesn't matter I think)

*NOTE: this is heavily inspired by @Ostella3D's shock mount, but I made a similar one from scratch due to it not quite matching my needs. Here is a link to Ostella3D's model: https://www.printables.com/model/119520-streaming-microphone-shock-mount-optimized-for-3d-