Yet Another Scoop - Threaded Handle

I saw a new scoop and thought a threaded handle design might be a good idea so I designed this one as a proof of concept.

Designed to print upright with no support, there is a significant bridge but I was able to print without an issue, the surface finish on the bottom of the bridge is a little bit rough.

With these tall items I like to print with “Complete Individual Objects” turned on, set the “Extruder Height” to 200 and print front to back like in the gcode I uploaded.

Any material will work, if you want to put in the dishwasher I suggest ASA or ABS.

You may want to use a bit of glue or epoxy on the threads to make sure the handle doesn't come loose.