Zebra CR 2278 Scanner Wand Stand

Wand stand for a Zebra CR2278 barcode scanner.

I designed this stand from scratch when I determined there was a need to anchor the base at an angle and distance that allows the scanner to be used in a top down orientation while in the wand stand.  The base is angled at 30 degrees.

The wand base needs to be attached to the stand using 2 x M4x5 screws.  There is a gap ion the bottom of the base to accommodate a screwdriver.

I printed the example in the photos on an X1C at 250mm/s.  Supports needed. Print on it's side and support the bridges.

Step file and stl included.