Under Desk Headphone Holder

This is just a quick design of an under desk headphone holder. It should hold a headphone with up to a 70mm headband. There is also a quick printing drill guide to help pre-drill the holes. In the pics it looks like the holder is angled downward but that is just some camera lens distortion or something since it is parallel to the desktop.

Print with supports (they will be minimal) and see pics for a suggested orientation (which is 45 degrees). The drill guide is optional but may help with positioning it under a desk.

If you print one, please post a make. STEP file is included for easy remix'in.

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables or MakerWorld, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!

Category: Audio

Changelog:

Update 9/2/2020- After using the original model for a while I decided to modify holder with a taller end to better retain the headphones. I printed and tested the new model and it works a bit better. The current (and final) version is 11.

Update 11/14/2020 - After using this some more I decided that it still needed a bit taller end to retain the headphones so I updated it with a new version V12, which I have not tested but should work.

I also added a flexible boot to for the V11 holder, which must be printed in TPU and achieves the same goal (UnderDesk_HP_Holder_v11-Bumper.stl). The TPU boot works for the V11, but if you plan to print this, I would go with the V12 unless your phones have a very thick headband ( > 20mm).