Mini Magnet Hardware Pickup Tool

Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too.  Make or use these models at your own risk.

I liked OpenSourceClassroom's "Magnet Hardware Helper" (https://www.thingiverse.com/thing:1277529) but wanted something simpler and smaller that would fit in my Stanley organizer where I keep my metric hardware (https://www.prusaprinters.org/prints/79702-stanley-014725r-organizer-bin-dividers-with-step-f). This was pretty simple to design in about 5 minutes and it printed in 20 (went with 3 walls and 15% gyroid infill in PETG). It works great and I did not need any glue.

I used a 5x15mm neodymium cylinder magnet but a 5x10mm cylinder magnet may also work. The magnet goes into the tool about 5mm.

Part is not oriented for printing but should print without supports.

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!