USB cable organizer (screw mount or use command strips) - with STEP file

This is USB cable organizer meant to be wall mounted. There are 3 versions which have different wall mounting options:

• The first is plain, and can be mounted with double sided tape.
• The 2nd design is for use with 3M command strips, it has a small cut out on the side to help with removing the command strip.

The final version uses screws. The screw holes are designed for a #8 screw. The hole spacing is 59.800mm. I have only tested the plain version which I mounted with command strips, the others are just minor changes so I am confident they will work.

The cable holder has 3 places for thicker cables (5mm openings) and 2 for smaller ones (4mm openings).

If you need a version to support thinner, or a mix of cables, check these out:

4 and 3 slot versions which support thin and normal USB cables.

6, 4 and 3 slot versions which support thin USB cables.

4 and 3 slot versions, which support normal USB cables.

This was inspired by, though not remixed from the following designs:

JKB007's USB Cable Holder
https://www.thingiverse.com/thing:3022893

RMoror's USB Cable Holder (remix of JKB007's original version)
https://www.thingiverse.com/thing:4130132

I printed it in the tall orientation which requires minimal supports. Seems to work fine for the cables I have on hand.

STEP file is included for easy remixing.

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables to see what new stuff I post.  Thanks for looking!

How I Designed This

This was designed with ViaCAD V9

Category: Organization