COVID-19 RULES for cube dwellers

This is a simple sign for cube dwellers whose co-workers may need a subtle reminder that some people would like to get through this interesting time without getting COVID-19.

The cube hanger is designed for a Haworth Compose Cubicle, however there is also a magnetic clip which is designed for a pair of 12x3mm Neodymium magnets in each hole (total of 4), which should work with any magnetically attractive steel surface (but I have not tested it). Also untested but so simple it should work is a ring which can be used to hang the sign.

Feel free to remix it, the STP file is included.

To print, set a filament change to switch colors. I used the Cura filament change script:

Extensions > Post Processing > Modify G-code

Then click on "Add a script" and select the "Filament Change" script. The layer selected will be the layer where the color will change (that is the next layer after the transition).

The hangar may require some sanding to fit the pocket, I used clear gorilla superglue to hold it on there permanently. Print with supports. Parts are not oriented for printing. Wash your hands :D

If you make one, please post a make. If you have a suggestion or problem let me know.

"No Whining" version of this sign is posted at the link below (same mounting design, just different text):
https://www.thingiverse.com/thing:4397999

How I Designed This

This was designed with ViaCAD V9

Category: Signs & Logos