Ender 3 Pro Cable Channel Protective Cover with zip tie mount (control box cables channel cover)

This is not tested by me, but has been made (see makes).

This is a quick remix of my Ender 3 Pro Cable Channel Protective Cover (control box cables channel cover), but I added a zip tie mount and changed the tab design so it will use screws and t-nuts on both sides.

The zip tie mount is intended to provide some strain relief for the cables that go through the cable channel to the main board compartment. I am not sure how well this will work or if the zip tie mount will take up too much space in the small cable channel, especially if you have a lot of cables going through the channel or added more. This is a print/use at your own risk.

If you want a channel without the zip tie mount, you can try this one:

https://www.printables.com/model/79632-ender-3-pro-cable-channel-protective-cover-control

Thanks to edz2891_564996 for testing this model, and confirming it fits on the Ender3 Pro!

The idea to put a guard over the cut on the original Ender3 was originally somebody else's (thanks to ilya_staryuk and Supavitax on Thingiverse and possibly others), so all credit for the idea goes to those folks, I'm happy to contribute with this design though.

Category: 3D Printer Parts