Cubicle Heaphone Holder for Haworth Compose cubicles (with STEP file) - REMIX no cord holder

This is the same as the original Headphone holder for Haworth Compose Cubicles (https://www.thingiverse.com/thing:4129244), but does not have the cord holder (for wireless headphones).

This is a remix of a headphone hanger which will use Qoupd's "Headphone Holder to be mounted with one screw" (https://www.thingiverse.com/thing:3840789) which is a remix of polxuriach's "Headphone Holder" (https://www.thingiverse.com/thing:180851).

The clip design was inspired by Mavericm1's Cubicle-hook. This is designed to clip over the top or side plates of a Haworth Compose cubicle with a cross section of approx 77mm x 2.6mm.

These are designed to be printed with minimal supports, but will require some on the clip part. The two parts are designed to be glued together, and I plan to use Gorilla SuperGlue Clear Gel to do that (it has worked well with PLA in other projects).

I have tested them and they snap on the top plate of my cubicle pretty firmly, but are easy to remove.

Sorry no pics of this installed, but it is designed for cubicles which have a thin top and side plates that do not have overhangs on the edges (and feel a bit flimsy as well). The profile of the top plate on the cubicles these are designed to fit is approx 77mm x 2.6mm , so basically a rectangle with those dimensions.

These models are not oriented for printing and I printed them at 0.2mm resolution. STEP files included for easy remixing. If you make one and like it please post a make, if you have a comment or suggestion to improve it post a comment and I will see what I can do to make it better.

Category: Music