Equate 34oz or Target 32oz Hand Sanitizer holder for Haworth Compose Cubicles - version 2

Update 3-10-2020: If you want a wall mount version, check out the remix here:
https://www.thingiverse.com/thing:4213018

This is a remix of the original version of the "Equate 34oz or Target 32oz Hand Sanitizer holder for Haworth Compose Cubicles". The major changes are that it is a bit beefier and now will use 2xM3 screws and nuts to hold the parts together. The rest is the same.

Original description:

Flu Season is the real "Season for Sharing", so I hope to be a Scrooge this year, and not participate. But that does not mean I won't be generous with the hand sanitizer :D

This holder is designed for an Equate 34oz bottle of hand sanitizer (https://www.walmart.com/ip/Equate-Hand-Sanitizer-with-Aloe-34-fl-oz/733944463), or a Up and Up (Target) 32oz hand sanitizer (https://www.target.com/p/hand-sanitizer-32-fl-oz-up-38-up-8482/-/A-11634442). The approx size of the opening is 69mm x 98.6mm with a few mm extra on the long side.

The clip is designed to clip over the top plate of a Haworth Compose Cubicle (which has a flat and thin top plate).

The parts will need some minimal supports. See the pic for the suggested orientation of the parts. I am printing it at 0.2mm resolution.

Alternatively, if the clip (partB) is printed with the top to the bed of the printer (to minimize supports, but possibly lessen the strength of the part), then I'd use 80% "support overhang angle" to minimize supports in the holes for the M3 screws, but still support the area where the M3 nuts will be placed.

This will require two M3x20mm screws and two M3 nuts (regular non locking). Glue is probably optional but can't hurt.

STEP file is included for easy remixing.

If there is any interest in having this as a wall mounted holder, I have an idea on that which would be simple to remix. So if you want a wall mount, and don't mind testing and posting some pics of it - let me know and I can work on a wall mount clip for this.

Category: Office