2020 PTZ Camera Mount using the Modular Mounting System

This is a mount designed to attach a Amcrest PTZ IP camera to my Delta printer. The camera is mounted upside down so it can look down from the top of the printer and stay out of the way. The arms are the standard 60mm Modular Mounting Arms, but I added a cable management channel to them. There are two 2020 mounts also, one with a cable management hook and one that is plain.

The camera mount was tweaked a bit to hopefully improve it a bit from the one I first printed in the pic. The hook on the mount is shifted down and extends another 1.5mm further in which should provide a more solid catch on the camera.

Update 10-8-2018: not a big surprise, but there is noticeable vibration when using this cam with the printer running, which is the point of course. It's fine for what I use it for, which is a birds eye view of my printers, but it would be sure to annoy some people. A wall or pegboard mount may be in the works.

If you make one please post it.

Category: 3D Printer Parts