Heltec V2 and V3 Meshtastic Lora case

Heltec V2 (and V3, both stl version are provided) Meshtastic LoRa device case.
18650 Li-Ion battery holder included (for longer protected 18650 battery).

I recomend connect some high-gain antenna (some better and bigger than stock one what came with that board).

Both buttons are working with this case (you can click buttons, there are holes-buttons for that).

Indoor use only, it is not mentioned for outdoor usage (unless you will make it waterproof somehow).

Printed with two colors for nicer look:)
Small green dot next to power switch and logo are printed separately and glued in place.

***************************** Edit 14.05.2024 ***************************
Some users reports that they have problem print top part correctly (button part is fused and not moving clearly) so i have added version with extended button gap (top part).
Also added V3 top and bottom standard version.

Switch used:
50V 0.5A SS12F15 Mini Size Black SPDT Slide Switch

https://www.aliexpress.com/item/10000003088863.html?spm=a2g0o.order_list.order_list_main.161.793f1802AygBkO

or

https://www.aliexpress.com/item/4000042632226.html?spm=a2g0o.order_list.order_list_main.166.793f1802AygBkO

Battery contacts used from 18650 battery holder:
ABS 18650 Power Bank Cases 1X

https://www.aliexpress.com/item/1005006348930637.html?spm=a2g0o.order_list.order_list_main.217.793f1802AygBkO

BambuLab X1C
0.2
20 infill
PLA+
no supports