Button/ Small parts Revolver Container

Heyho :)

Here I spontaneously designed a small revolver storage system for small pieces like buttons :)

In short:

Assembly:
Add the Lid on top of the base and then insert the Lock and screw it in place with a little force. It shall not rotate later on.


This is a left-hand thread! So please turn counterclockwise :)

 

Insert all the things you like and then close the storage system with the cap if needed!
 

Update 14.03.2024: New Cap Design
I redesigned the Cap so it works even better and stuff won't catch inside the cavity while rotating the container head downwards :)
 

Printing instructions:

I printed all Parts in PLA/ PETG with 15% infill and 2 Perimeter.

Scaling:

You can scale the box to store even bigger or more stuff! Simply scale all parts in the same way! (I am currently printing a 130% scale one)

Also you can adapt the Cap size by scaling if the stock one fits too loose/ tight. (That depends a little on your printers tolerances)

Get creative!

You can add a Text with your (Prusa) Slicer to the bottom to speed up the searching process! 
You can make it another color or a ,4 mm cutout! (No Prusa XL required ,-))

Have fun!