Netgear 8 port switch mounting plate

mount so that the pegs slide into the side openings on the netgear 8 port switch. (if you have a different sized switch you can probably just remeasure yours and modify the model, I provided the fusion file)

I used this to command strip the mounting plate to the back of my TV and then slide the switch onto that. you could also use this to wall mount the switch.

Printing Instructions:

I printed without supports, with the big flat side flat on the bed, but the peg overhangs drooped a bit, so you might want to add supports there.

I used PLA, with 10% infill.