Climbing fingerboard

An easily printable fingerboard designed for finger training. The rope is positioned in the middle of the pull area to ensure the tool cannot tilt, which reduces the risk of finger injuries.

I used PLA material with 6 walls and 50% infill. However, since it doesn't require much material, consider using 100% infill for extra strength.

• V1: 35mm wide with a 15/20mm deep pocket
• V2: 25mm wide with a 15/20mm deep pocket
• V3: Intended for those who wish to train using a closed crimp grip. However, I personally do not recommend this, as it carries a higher risk of injury, to the best of my knowledge.