This is a wall mount for a Eufy indoor pan/tilt camera.
Update 4/3/2021: Extended v5
- Extended from wall another 5mm (after installing v4 and realizing it is still a little short).
- Changed arms to angle 50 degrees instead of 45 degrees in order to extend farther without making wall plate taller.
- Removed side holes on arms, now solid walls. They seemed unnecessary and looks more aesthetically pleasing without.
- Removed wire spools on top. They were too small to be useful, and unlikely to be used anyway.
- Leaving Extended v4 versions up in case anyone preferred the removed features.
- Uploaded v5 STEP file as well to allow easier modification/remix if desired.
Update 1/2/2021: Extended v4
- Added extended version with extra 10mm offset from wall. This will allow room for the original micro-USB plug without needing to turn camera base to the side or add a USB elbow.
Features:
- Extra/alternate screw holes to angle the camera base slightly to the side slightly to fit the USB power cable.
- Center screw hole to make use of standard tripod-style mounting hole on camera base
- Cuts on ~~sides and~~ back of mount to allow power cable routing from different directions
- ~~Cylinders on top to wrap / hide excess cable~~
Print Settings
Printer Brand:
Creality
Printer:
Rafts:
Doesn't Matter
Supports:
Resolution:
.2mm
Infill:
Filament:
Generic PLA / PETG
Category: 3D Printing
SC Projects
