May 16, 2024
Description
I took the stream breaker and added a cylinder to the top so it can be held down by the lid. I also added some fillets around the legs for strength.
I'm not actually sure how people have been attaching the original stream breaker, but from photos I have to assume it was glued in place. I didn't want to do that, just in case I needed access to the water outlet for some random reason.
Print with the cylinder top touching the build plate. Low infill (5-20%) should be fine. No supports needed.
If you use the .3mf and your slicer gives you a warning about multiple objects at different heights, make sure you load it as a single object (click “Yes”). Or, just use the .stl file instead.
May 16, 2024 - Added .stl file
License:
Creative Commons — Attribution — Noncommercial
willy.is.making
