E3D Revo Roto Toolchanger Mount

Two Roto toolchanger mounting options for use with or without the Duet Roto Toolboard. Both of these designs use a 404010 blower fan as comes with the standard tool options from E3D. The fan duct should be printed with a high temperature resistant material such as ASA or ABS. It is recommended to tap all the threaded holes, however you can screw directly into them if needed but they may need to be reamed out with a 2.5mm drill.

Printed Parts List - No Toolboard

• 1 x Roto TC Plate Bracket
• 1 x Roto TC Part Cooling Bracket 404010
• 1 x Roto TC Plate to TC Reciever Bracket
• 1 x Roto TC Reciever Support
• 1 x V6 Receiver Top
• 1 x V6 Cable Support

Printed Parts List - With Toolboard

• 1 x Roto TC Plate Bracket
• 1 x Roto TC Part Cooling Bracket 404010
• 1 x Roto Duet Toolboard TC Plate to TC Reciever Bracket
• 1 x Roto Duet Toolboard TC Reciever Support
• 1 x Roto Duet Toolboard TC Cable Support