BitBox Stackable Cantilever Sewing Box

Bitbox stackable folding storage boxes

Easy assembly, requires no glue or screws, 100% 3d printed. When stacked they click on top of one another, has an extendable handle and customizable storage slots.

Perfect for jewelry, sewing collections and small parts of any sort.

The print profile provided has been slowed down wall to fix the known benchy hull line problem, feel free to increase speed and change supports / colour profiles if you want a faster print with a minor drop in quality

*Advised to avoid silk and weaker filaments*

I have tested many times, great filaments include sunlu pla, cc3d, ziro, elegoo, eryone, flashforge - all working except ziro carbon fibre and silks. cc3d silk (blue metallic photo) is the only silk that works great for a metallic look, just print slow.

Colours used in the pictures -

Flashforge burnt titanium

Various generic sunlu

Ziro GID & glitter

cc3d silk blue

And several other

Printed at 80 percent - easily scalable, 100 percent works if you want to scale up, just fits on the print bed (250mm)and also 60 percent is also tested and works perfectly. Simply scale and orientate on the beds.

Stl files provided are all 100 percent scale.

Assembly

Very simple and should be straight forward.

Step one after all parts are printed is to attach the lid to the top trays, using slight pressure push together and click in place, it will be easiest to hook one hinge in at a time.

Step 2 is to insert the carry handle into the slots on the bottom tray. Simply hook one side in and then the other, gently squeeze the bottom clips into the slot, be careful not to flex and break the bottom tray. then add the washer and nuts to the screws to secure the handle.

Step 3, the final step is to assemble the arms and handles for the lids. Note the orientation of the middle trays, the thicker edge facing outwards.

Assemble the arms one side at at time, see photos to see the order needed for the cantilever action, once you insert the arms into their holes, fasten with the printed c-clips. Also take note that there are a few extra printed clips incase you accidently break some, I've tested many filaments and the only I have trouble with so far have been silk filaments and filaments with additives, glow in the dark works great strangely however.

See photos if any more help is required or just ask.

Enjoy.