3DLAC_Holder_(wall or 20mm Slot 6mm aluminium profile 2020)

Hey everyone, like many of you, I've spent some time and filament searching for the perfect holder for my trusty 3D-Lac spray can adhesive. But nothing I found seemed to fit the bill: too fragile, awkward orientations, unnecessary complexity, poor grip... So, I decided to take matters into my own hands and design my own!

I had a few key criteria in mind: it had to be durable, use minimal filament, print seamlessly, have a practical design, feature a strong clip, and not look too shabby. After a few iterations, I'm happy to say we've nailed it!

For printing, I recommend using 3 walls and any material will suffice—I used PLA, but PETG should work just as well. ASA/ABS might not snap as securely, and carbon-reinforced filament could be too rigid. In other words, keep it simple and happy printing!