Seed starter with light dome

Seed starter with a light dome. Works with 1cm wide LED strips. Use a timer to turn them on/off in a given interval. 

Print settings

• any rigid material
• 0.4mm nozzle
• any layer height
• no supports
• default infill

Caution! The legs on the light dome are thin and tall, which may cause wobble, so it's advised to slow the print down after ⅓ or ½.
 

Changelog:

v2.0.0 (1.4.2024) - improved dome attachment in corners of the basin.

v1.0.0 (12.3.2024) - initial upload