Raspberry Pi Camera - magnetic case

remix of the camera housing from https://www.printables.com/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m

you'll need to get the camera front from the above (the front for the pi camera 3 needs to be slightly different https://www.printables.com/model/368788-raspberry-pi-camera-mount-camera-module-3-version/files has a few options)

I included a 3mf file that includes a stop command where you need to insert the magnets. make sure not to print with supports (the slicer will complain about the voids but you are going to fill those with magnets).

I used this to stick onto my enclosure (works well with the prusa enclosure).

V2 I added a some V2 files, which split the case into two parts: the camera housing and the magnetic mount. the magnetic mount can be adjusted to have different tilt angles (you need to adjust those in the f3d file with the tilt parameter). I included files for a 10 degree tilt (which is what I used for the prusa enclosure).

To pint/assemble the V2, you will need to add stops to insert magnets as before. once printed you will need to use a M2 threaded insert into the main camera housing and then use a M2 screw to join the housing with the magnetic mount.