March 17, 2024
Description
Samsung Smart Tag Wallet Mod
Make it slim to fit inside a wallet; You will need to remove the original battery connector springs from the pcb by unsoldering them;
Dimmensions are credit card size but with 3mm thickness;
I used the soldering iron to melt the edges to fix the PCB and Gorilla tape over the battery and pcb
//Todo:
1. Add button nipple to the print so you can press the button
2. Make CR2032 holder with electrical connection
3. Can be made slimmer by 1mm if using CR2016 battery instead of CR2032. I'll publish that one also
Can be printed in PLA PETG etc (i used Eryone PETG)
License:
Creative Commons — Attribution
MallV0
