Alastor's collapsible staff

Straight out Hazbin Hotel, meet Alastor, the enigmatic “Radio Demon”, known for his powerful sorcery and status as one of Hell’s most feared overlords. 

Once a notorious radio host and serial killer, Alastor’s transition to the afterlife saw him swiftly rise to power, charming and terrifying in equal measure.

Now, step into the shoes of this charismatic character with this meticulously designed 3D model of Alastor’s Staff. Made for cosplayers and fans, this model is not only a faithful recreation of the iconic prop but also optimized for 3D printing. Bring the flair of Hazbin Hotel’s most beloved demon to life and make a statement at your next cosplay event with this stunning, print-ready piece.

This model features a collapsible design for a surprise effect and ease of transportation, perfect for making an entrance or travelling to conventions.
The staff shaft connects seamlessly to the top and the base through a threaded system, ensuring a secure and sturdy assembly which doesn't require any glue between the the pole and these parts. 

Some glue will still be necessary.

Print instructions:

Do NOT use vase mode: the pole parts are designed to be printed with 2 0.45mm walls to be extra sturdy and not break easily.
Extra walls for the connecting part in the main body are strongly advised.
If using ironing mode, make sure to enable supports and to create an extra piece to print to allow for a perfect flow for the top part.

Assembly instructions:

Collapsing ver.:

You'll need to print all the selected parts once, I'd suggest using the color in each file's name.
You'll need to glue together these parts:
All the “top” files (the eye_red might be just a snap fit)
sixth cap_black with sixth_black and first cap_black with first_black make sure to place all the pole parts together before gluing these last two parts

The full top will connect to the pole to the foot with the threads.

Compact ver.:

You'll still need to print all the parts you need once, I'd suggest using the color in each file's name.
You'll need to glue together these parts:
All the “top” files (the eye_red might be just a snap fit)
compact pole_black with compact pole cap_black
 

The rest will connect with the threads.
 

Troubleshooting:

All the parts printed perfectly and with a perfect fit with each other, but some people had some problems, so I included the .f3d file for some slight corrections.
In case you don't want to put your hand on the fusion file, you still have some other options:
-scaling the file in the slicer;
-Use some packaging tape to increase slightly the radius of the pole's top part and have so the correct amount of friction.
-If you have any other problem you can contact me without problem

9th april update:

Added a compact pole version, when fully built it'll be around 48 cm high.

Next updates roadmap:
-Not collapsing ver. (each part will probably be individually threaded)
-Voice modification ver. (I'm looking for a circuit that enables to modify voice to have a radio effect, as soon as I find one I'll start working on a new model)