Heavy Duty Guitar Wall Mount (2 SIZES & WALL OFFSETS)

Heavy Duty Guitar or Bass Guitar Wall mount

hidden Screw Design. Fix the bracket to wall then slot mount over

Comes in 

 - 53mm(approx internal prongs) 

 - 53mm neck slot with 5mm wall offset

 - 53mm neck slot with with 10mm wall offset

 - 43mm neck slot width

 - 43mm neck slot width with 5mm wall offset

 - 43mm neck slot width with 10mm wall offset

 - MUST print bracket laying down so layer grain runs the length or bracket

• MUST print the mount standing up. If not, I can not guarantee the strength of the part. 
• 0.2 layer height
• Minimum of 3 wall thickness
• 20% Gyroid infill
• The guitar mount works great in quality PLA, but stronger materials would be beneficial. 
• See the image attached for hole dimensions. I used M4 Screw. Approx 40mm in length
• Use suitable wall fixings to avoid failure. 

For Ukulele Wall mount

https://www.printables.com/model/823312-heavy-duty-ukulele-banjo-instrument-wall-mount