September 24, 2023
Description
This is my remix of Adarkstudio's case but with a cable chain mount. It is compatible with the Creality stock or silent board, SKR Mini E3, and EZBoard Lite.
If you any questions or issues, I'll be sure to answer them!
Notes:
• Print "Case No Z Cable Hole.stl" if your using a BLTouch or any other ABL sensor.
• Refer to Adarkstudio's thing for installing the sidestop mount!
• I recommend using a much more silent fan than the stock ones. I'm using these ANVISION 4010 24v fans. Some other brands out there include SUNON or Orion fans.
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
0.20 mm
Infill:
3D Honeycomb, 10%
Hardware
The only hardware you need is for the lid:
• 4x M3 x 8-16 mm screws
• 4x M3 washers (optional)
If you're using the sidestop:
• 2x M3 x 6mm
Fan Cover Dust Filter (Optional)
I super glued this dust filter on my fan cover. Unfortunately, it makes the fan more whiny and it will restrict the airflow.
License:
Creative Commons — Attribution — Noncommercial
7
TwoPuncakes
