Easter Bunny "Filament Painting"

Easter Bunny with bow  "Filament Painting"

There are two models one 150x150 seccond 10x15. Setup is same.

👀Preview:

🔧 Printing Settings:
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

🎨 Materials:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA 3Dpower Grey Transmission Distance: 2.7
PLA Jamghe White Transmission Distance: 5.2
PLA JakobFIlament Black Transmission Distance: 0.3
PLA 3Dpower Red Transmission Distance: 5
PLA Jamghe White Transmission Distance: 5.2

🔄 Filament Swap Instructions:
Start with Black
At layer #14 (0.68mm) swap to Grey
At layer #18 (0.84mm) swap to White
At layer #27 (1.2mm) swap to Black
At layer #30 (1.32mm) swap to Red
At layer #40 (1.72mm) swap to White for the rest.

💖 Support & Sharing:
Your support fuels us! If you like this model, don't forget to rate and share it with the community. 
Your feedback and creations are invaluable to us. 👍💖!

Enjoy :-)