Cover to protect bearing and ISIS / Q-AXLE drive of a Unicycle

When travelling you might need to pull your cranks off. Typically there is some grease on the bearing and you have to put some paper towels and plastic bags on it before placing the unicycle into the suitcase.

This device will cover the ISIS drive as well as the 42mm bearing. It will gently slide over the ISIS drive and has some clearance for the bearing in case it is dirty. The screw will be put on hand tight and protect the cover from falling off.

Printed with PETG as the unicycle might be exposed to the sun when travelling. No support required when printing with the screw hole down on the print plate.

Added a cover for Q-AXLE as well as a 10mm Allen key for the Q-AXLE cap. The key can be stored in the cover.