Skådis magsafe mount

## Use ironing on the contacting surface between the charger and the print to ensure that the charger sits flush ##

This overdesigned magsafe (Spigen ArcField MagSafe) to skådis is made with slimness in mind. The back piece is only thick enough to keep the M3 countersunk screws flush and skeletonized for material savings and or better airflow(TM) to the charger.

Instead of going with a compression fit i opted instead to have three lips that rest against the chamfer on the top part of the charger.

The unit has three holes with a 20mm gap to accomodate a two, or one hole mounting option.

The divots above and below the holes are for indexing and uses bamboo Q-tips for pegs, cut to length after inserting.

The M3 countersunk bolts used are 14mm long and goes through the entire length of the t-nut.

The unit is mounted to the pegboard with T-Nuts provided by @6d6178 and @SamuelHaberli_587722 for the M3 variant used