Ryobi PCL702 Hand Vacuum Extension

Wanted an extension that tapered down to a narrower opening than the standard crevice tool and also wanted something I could print out of TPU to be able to have some squeeze and give to get into even tighter spaces without worry about damaging/scratching surfaces or the tool breaking.

There are two STLs attached.

The version with built-in support is designed to be printed in TPU with a corse layer height between .28 and .32 mm.  Using a well tuned TPU profile, the support section should tear away cleanly with a little effort.  Print it vertically with an 8-10mm brim for print stability.

Also is included is a version without built-in support is you prefer to add your own.