Chamfer Guide for Block Plane. Magnetic!

This model comes with 2 rails and 2 brackets. The rails snap onto the bottom of the plane and the brackets bolt onto the rails to help with aligning the rails. There are hash marks on the brackets so you can always go back to the same depth of cut on your chamfers. Feedback and Makes appreciated. Happy Printing!

Hardware:

4      M4x.7 25mm Hex Head bolts

4     Washers (these sit under the brackets to give enough space for the chamfer)

4     M4 Nuts 

6     8x3mm magnets

You can use the knobs of your choice I really like these. https://www.printables.com/model/441885-knurled-m3-m8-thumbscrews-no-support

Edit: I added custom washers that register in the brackets and rails. I also widened the recess for the plane blade.