Synology DS220j Power Plug Lock

Keep your NAS power plug secure by using the Kensington Security Slot!

Specs

• ✅ Synology DS220j compatible

Print tips

1. 🧩 1 part
2. ⮑ Print original orientation from the STL
3. ✨ Support free!
4. 🏋️ 15% infill
5. 3 perimeters can help with strength
6. PETG recommended for ductility of the small lock insert - it might get bent, but it can be bent back while still remaining strong

How to install

 1. Insert power cable, route out towards the right side, right below the fan. 

2. Insert the 3d printed part into the Kensington Security Slot, facing upwards

3. Rotate the part 90 degrees anticlockwise

Important! Do not force. Ensure the part is fully inserted. If the “tab” becomes bent, bend it back (if printed with PETG). If you're having trouble, try it out without the cable plugged in to get the feel for it.

4. Insert the ethernet cable. This will “lock” the part in place