Belt Barrier Wall Attachment

This is a wall attachment for a belt barrier. Like the ULine belt barriers or similar. This is to attach to a wall using wall anchors, not included. or could be glued if you have glue strong enough. Printed flat on a Wham Bam Flexible Build surface. Tried with PLA, but the connection wasn't strong enough and broke. Worked best with Resin, so drill out the screw holes SLOWLY and CAREFULLY. I used a drill bit and drilled it by hand to not crack the resin.

Print Settings

Printer:

Elegoo Mars

Rafts:

Supports:

No

Resolution:

Infill:

100

Filament: Elegoo washable resin Resin

Category: 3D Printing