Dillon XL-650 Primer Rod Holder/Clip

Where to put that primer rod when the primer feeder is empty?

Print one or two of the clips and now you have a place to put that rod - just clip them on the safety primer tube and store the rod when not in use (see photos).

Shown model is printed in Devil Design PETG.

>> If you like the design, please leave a like, rating or a tip... :)

Print Settings

• 0.20 mm layer height, 25% infill
• No support or elephant-foot compensation
• 2 perimeters, 3 top and 2 bottom layers
• No post processing needed