Unicorn Bandaid Printing Inkscape Template

This Thing is an Inkscape template for printing on a bandaid. The bandaid I used just barely fit onto my Sticky Note Tray, but I needed to keep it clipped down with binder clips. The dimensions of the bandaid were a 19mm x 65mm wide area with two small curved areas at the edge, making the entire bandaid 79mm long.

Custom bandaids for all!

As with the 100 acre wood sticky note GCode ( http://www.thingiverse.com/thing:6729 ), this is based on the now public domain original Winnie The Pooh drawings.

Print instructions

Instructions

1. Print the Sticky Note Tray, insert magnets
2. Add bandaid
3. Add two small binder clips, pinch and twist the handles to remove them
4. Print (hopefully using the autohoming code!)
5. Adorn thyself!