MIter Gauge Alignment Tool

This model uses taper pins and a miter track to align your miter gauge precisely. Many times the stock miter gauge is off and then you are stuck using a square and some guesswork to make sure the fence on your miter gauge is aligned with your miter slot. All you do is slide your miter gauge into the slot on the print and place the pins at the angle you want to achieve. Push the fence against the pins and your fence is now aligned. Lock it and make your cuts.

Hardware: 

2     6mm Taper Pins https://www.mcmaster.com/catalog/130/3824/98445A615

Feedback and Makes are appreciated. Happy Printing!

Edit: There are 2 test pieces to make sure everything fits. One for the miter gauge and 1 for your miter track.

Edit 3/20: Adjusted the Taper on the holes to match the pins tighter

I also included a STEP file for the Taper Pins I modeled on.