Smartphone Smart Spring Stand

Smartphone Smart Spring Stand is an elegant design in one piece - just bend the holder and snap on the phone, the spring part locks it in place and makes a solid stand.

The holder is almost invisible but solid and allows for the easy access to screen and buttons.

It's just as easy to remove it again, just squeeze the sides and the holder releases the phone.

When not used, it can become completely flat and is very easy to bring with you wherever you go ;-)

Tested with:

• Huawei P10 (+ with case)
• Nokia 3 (+ with case)

Shown model is printed in PETG, but any filament whit a little flexibility will work.

Update: Added models when phone is in hard cover (case). Models are named "With Case".

>> If you like it, please leave a like, rating or a tip... :)

Print Settings

• 0.20mm layer height, 20% infill
• 2 perimeters, 3 top and 3 bottom layers
• No support or elephant foot compensation needed