Ender V3 SE Screen Cover

9.3.2025 - Hinges V2

Many of you have a problem with the design of the hinges. I decided to offer another solution. And it is literally indestructible. Hinges 2-1 V2 and 2-2 V2. You only need an iron rod of the right diameter and length. The diameter needs to be tested, the inner hole in the hinge is 2.8mm (in reality it will be smaller after printing) and the distance between the bottom of the hole of one and the other hinge is 34mm after mounting in the assembly. It will be enough to shorten the nail of the appropriate diameter ;-). (I think 33mm length and 2.6mm diameter might be OK) I haven't tried it, because the originally designed hinges are still holding.

I would be happy for feedback.

I hope you enjoy.