BTF-Lighting A24V10A PSU Case & Controller Mount

Overview
Designed with precision and robustness in mind, this protective case is specifically tailored for the BTF-Lighting A24V10A PSU and controller. Its hefty structure, with 1cm thick walls, ensures unparalleled protection for your device. Due to its substantial size, the model is conveniently segmented into four parts for ease of printing on standard print beds. I've also included the full size parts.

Features
• Sturdy Construction: With walls 1cm thick, this case offers maximum protection from physical impacts.
• Modular Design: Split into four parts to accommodate most 3D printer beds.
• Enhanced Fastening System: Each bottom part includes holes for M4x10x6 embedded nuts, secured with a 25mm M4 bolt and an 8MM OD washer, ensuring a tight and secure assembly.
• Optimised for Strength: Recommended to be printed with 6 perimeter walls and 15% gyroid infill for exceptional durability. A minimum of 3 walls is advised to provide ample plastic for the embedded nuts to melt into, ensuring a solid, fastened structure.
• Material Recommendations: Printed with Uzy Galaxy Black PLA for a sleek finish and optimal performance.

Printing Recommendations
• Material: Uzy Galaxy Black PLA
• Wall Count: Minimum 3 walls; 6 walls recommended for enhanced strength.
• Infill: 15% gyroid infill recommended.
• Support: Bottom part with overhang will require support when printing. 
• Additional Hardware Required: M4x10x6 embedded nuts, 25mm M4 bolts, and 8MM OD washers for assembly.