KSG 410 Shell Caddy

This is a 7 shell caddy for Keltec KSG 410 shotgun. Mounts using one of the Mlok slots on the factory carry handle.

Needed: [2]  -  M5x(OD)7.1mmx 8mm Length(or shorter) Heatset inserts

               [2]  -  M5x8 pan head screws

               [2]  -  M5 Washers

               [1]  -  M3x5x4or6 heatset insert

               [1]  -  M3x6or8 pan head screw (washer optional)

Measure 30mm from rear edge of last mlok slot toward stock end, drill 3mm hole, centered through top of carry handle. .