Anet A6/A8 Threaded Frame Mount/Clamp, Upgrade

If you want better and faster printing, you need to make the Anet A6/A8 more rigid with a stiffer frame.
One way of doing this, is to clamp/mount the y-carriage M8 rods to a solid base plate. The plate can be plywood or similar.

Most other solutions I found is either too big, requires dis-assembly or lacks a firm grip on the frame.

This design is a simple U shaped clamp/mount with integrated thread, keeping a firm solid grip, no sliding when printing.
Very easy to use after the printer is assembled - Place printer on base, put clamps on M8 rods, mark holes and fix printer to base with screws.

To assemble you will need:

• 4x printed base frame clamps (optional without thread).

8x Screws for mounting clamps to base plate. I have provided a version without threading if needed.

See photos for assembly. Steady printing ... :-)

>> If you like it, please leave a like, rating or a tip... :)

Print Settings

• 0.20mm layer height, 30% infill
• 3 perimeters, 4 top and 3 bottom layers
• No support or elephant foot compensation needed