Dillon Locator Button Tap/Handle Upgrade

I keep dropping those small locator buttons on my Dillon XL 650 reloading press...
This tap/handle is making my reloading life a lot easier.

Tip: To get better adhesion and give time for layers to cool - print 3 or more tabs at a time.

>> If you like it, please leave a like, rating or a tip... :)

Print Settings

• 0.20mm layer height, 20% infill
• 2 perimeters, 3 top and 2 bottom layers
• No support or elephant foot compensation needed

Shown parts printed in ABS with acetone surface finish, I have now switched to printing them in PETG.