Insta360 X3 Cases

So i made these cases to fit an insta360 x3 camera with the lens guards, it has a tpu insert that holds the camera in place and should be soft enough to not damage the lens. it also should fit the camera without the guards and without the insert it will fit the camera with the sheath. 

There is two versions. one with spots to hold two batteries, 4 microsd cards, and a pocket that you can stuff the little microfiber cloth in. then a version thats just for the camera alone. the insert fits in both.

both use M3 x 25mm screws for the hinges and latches. and tpu should be used for the seal and insert.