February 8, 2026
Description
https://makerworld.com/en/models/426056
This is the 2.0 version:
Now with more bounce, stronger, thicker, more fun!
Prints without supports for easier post processing. Print with a 5mm brim, 10mm if you have adhesion issues.
For best results, print in PETG, or a tough PLA! ABS also holds up well. Regular PLA tends to crack easily, try a FPLA instead if you have access.
Brim IS necessary. If you are having adhesion issues, clean build plate with alcohol and increase brim to 10mm.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11
E.T.
