K8200/3Drag Frame Clip with Lock (experimental)

This is a K8200/3Drag frame mounting clip with locking screws. It is based on my redesigned of the K8200 Frame Wire Clip On.

Next step will be to use the clip in other designs there could benefit from the more secure frame clip.

This design is experimental and may change, but usable as is.

Inspired by K8200 FLAT Frame clip Velleman 3D printer.

>> If you like it, please leave a like, rating or a tip... :)

Print Settings

• ABS/PETG 0.30mm layer height, 60% infill
• 2 perimeters, 3 top and 2 bottom layers
• No support or elephant foot compensation needed

Instructions

Print one "Clip" and two "Screws".
Use high filling ration to make it strong and preventing it from breaking.