Fractal "Fairy Crystal" Box

Here is a 5-sided box that will hold 5 of the small 4-sided Fairy Crystals.  

The center windows allow light to come through the tops of the crystals.  The side windows display the base of the crystals with the “Crusaders Cross” aka “Cross made of Crosses”.

This one is designed for MMU.  I guess you could slice it again for a single color but much of the Art would be lost.  

Print in translucent PetG.  2 perimeters, 4 bottom and top layers, 20% gyroid infill.  There are 4 parts: upper and lower, each with an A part that is the bulk of the print and a B part that is the stripes and text.   I recommend to print upper and lower parts separately to avoid stringing between the 2 parts.

Check the OpenSCAD file if you want to change around the text.  There is not much room for the letters.  

Postprocessing: trim off any stray gobs, then gently run over it with a heat gun to get rid of any stringing.