Pillar drill / Drill press center finder

Note: I am moving to Maker World, I don't have to time to make new uploads here too. Check it out for new models!
https://makerworld.com/en/@gustav.ferdman

Printing:

Print the base and choose between the 3 different angles, 30 deg, 35 deg and 45 deg for the other part (triangle).

Print all part lying down without supports. Make sure to align your prints such that the small indication tracks are facing up.

Print in PLA with 2 or more walls and 15% infill.

Assembly:

Use a M3 screw to attach the triangle to the base, it is supposed to selfthread into the base. The screw must a at least 10mm long for a secure mount. Do not tighten the screw all the way, the triangle must be able to turn around the screw.

Note: the hex-bit on the base is 8mm.

Drop a like if you liked this model, hope you found it useful. :D

Don't forget to post you makes!