MiniRenogy Soshine Mount Brackets

This is simply the “Panel-Bracket-Right” and “Panel-Bracket-Left” from the Soshine mount solution, resized and reshaped to fit the 3w 9-volt solar panel (nicknamed the MiniRenogy since it shares a very similar glass/aluminum design) found on Aliexpress. Mounting holes were also changed (double to single) to line up with the panel's holes. Since it's symmetrical, you'll need to print one for each size. 

v3 UPDATE: 

Instead of having a left and right panel bracket, it's now just one symmetrical model for both left and right sides. This gives more strength in the crossbeams, since they're putting more pull tension from the mounting bolt. 1mm was also shaved from the bolt-hole feet, to reduce any flex in the frame, as the centre bolts are tightened. 

You will still need to print the other original parts (Mount-Bracket-Right & Mount-Bracket-Left) from the Voltaic Enclosures page.

Print with the same recommendations from details page on the original.

To enhance the stability of the pole/pipe mounting bracket, I’ve also provided a U-bolt saddle here.

For a more comprehensive remix of this, that inspired my own, see here.