Easter Bunny Friends: The Bunny Wizard

Unleash the magic this Easter with the wise and powerful Bunny Wizard!

With years of experience studying the powers of arcane magic, the Bunny Wizard can cast all kinds of spells with a wave of his mystical staff fitted with an egg-shaped crystal ball. He can also harness the element of fire from his paw.

There are two versions of the Bunny Wizard to choose from: one with the hood over his head, and the other wearing a pointy wizard hat.

Happy Easter everyone!

If you like this model, visit my Facebook page to view my other 3D sculpts and prints, as well as additional pictures: https://www.facebook.com/ScenestruckArt

If there is a problem with the model, please let me know. Constructive feedback is always welcome.

NOTES:

• FDM tested (Ender 3 V2 Neo). Files sliced through PrusaSlicer 2.6.1.
• Resin print at your own discretion.
• Glue may be required.
• The Staff is slightly skinnier to easily fit inside the paw. It may not have a tight grip.
• For the flame, if your preferred slicer indicates missing layers near the tips, I recommend either lowering the layer height between 0.10 - 0.12 mm, or using a smaller diameter nozzle. Increasing its scale may also work, but you'll need to do the same for all other files.

FDM settings:

Print Temp: 200 - 205 C
Bed Temp: 60 -65 C
Layer height:0.16 mm
Infill: 10%
Supports: yes
Speed: 40 - 50 mm/s

Filament (all PLA):

Esun: Peak Green, Glass Lemon Yellow
Creality: Rainbow
Anet: Red